U-BCOO 12V 60AMP Manual Reset Circuit Breaker Vehicle Current Overload Protector
$12.88
- Self-checking and manual resetting of the circuit breaker, the circuit needs to be disconnected during modification, directly press the red button on the circuit breaker, and then the long handle will automatically open to cut off the power supply, compatible with the 12V system.
- Compact and lightweight design, small footprint, easy to install.
- When the current reaches the circuit breaker value, the long handle will automatically open and cut off the power supply. Usually, the short circuit condition will trip. After troubleshooting, the long handle can return to the original position to form a path.
- A wide range of applications, this circuit breaker can usually be used in auxiliary circuits and accessory circuits of truck and bus RV and marine applications. The system uses battery isolators to manage and protect the batteries in multi-battery devices.
- Manual reset circuit breaker can also be used as battery on / off button switch.
- Amazon Buy: Amazon Store
Out of stock
Abdulrahman Omar (verified owner) –
while I have not popped it yet, so I can’t attest to its circuit breaking ability or its calibration to 100A, but it feels sturdy and I love the kill switch function. I mounted mine in a tight spot under the hood, and if I had gotten a one with a removable fuse, I wouldn’t be able to easily remove the fuse anytime I wanted to cut the power
Duff Mann (verified owner) –
Great wire and a lot cheaper then buying locally. Used to restore a 1968 truck camper and worked very well.
MDW101 (verified owner) –
i do not know about the true water resistance of this breaker, as i tend to mount my electrical components away from water/liquid sources, but it seems that it should stand up to, at least, mild water spray. It is very straight forward to install, mount on secure surface, and do not let the wires touch anything, good to go. The build quality is pretty sturdy, i am not afraid of breaking the cable studs off. It is stout enough that, if I need more, I will get them from here.
Nick C. (verified owner) –
So much better than dealing with fuses.
Pla77 (verified owner) –
These things are amazingly easy to install almost regardless of the wire gauge. They seem to be water resistant at least on the wire connections themselves. Having caused them to trip already I can confirm that they actually work and protect your hardware from exploding.
I almost regret getting a fuse block because these are so much nicer to work with and double as switches plus if they blow you can reset as opposed to a fuse blade. Thumbs up all around!
The only con that I would have is that the switch and the button are probably not waterproof where is everything else seems to be waterproof so If you need to use this on a Marine application you’re going to have to do some sealing but not a lot.
Ken (verified owner) –
Bought this to replace an inline fuse holder that was deteriorating from time and engine compartment heat. This is my first inline relay I have installed for a car audio system. It seems like a good item but time will tell the story. I am happy with the purchase.
Kevin S (verified owner) –
The countersinking on the holes for the screws to lock in the wiring leaves only thread or two, when torquing the screws, it is VERY easy to strip the threads out. After discovering this, It was trivial to put a drill through the existing hole to open a new one on the other side, then I put a tap through that hole but WITHOUT countersinking. Yes it makes starting the screw a little fiddly, but I was able to properly torque the screw down to get a good solid connection.
Ron M (verified owner) –
I use these in my RV solar system circuits. Well made and have worked flawlessly for a year now! I use them as an on/off switch too.
Ray (verified owner) –
I haven’t tripped it yet and I’ve run a few things with my 1000w AC/DC 12v to 110v auto converter. I can trip it by hand which is handy so I don’t leave the converter on and drain my battery by accident. I like it so far because it will just trip like a home fuse, I can reset it and I don’t have to replace the whole fuse.
a.olson (verified owner) –
This relay works great for the do it yourself mechanic….quality is ok….I’ve had a couple overheat and then the flip switch starts to hang up….some times they pop with no load ……great for small projects BUT if you need true reliability like on a boat or hot rod look for something a little better